As we all know that with time things to get wearied-down thus likewise fiber cables also get damaged as the time passes by. Thus it need to get them tested on regularly basis, so that possibilities of hindering data transmission efficiency can be lowered down or eliminated. This is where a crucial aspect of fiber optic tester is needed to be conducted.
Fiber optic inspection: With the increasingly higher data rates are driving decreasingly small loss budgets, fiber optic inspection and cleaning are growing more and more important. If we want to decrease the overall light loss, the only way is to hence our job of properly inspection and cleaning. There are two types of problems that will cause loss when doing the fiber optic connection with the adapters, one is contamination, the other is damage.
We also know that when we checked optical equipment, it generally requires fiber optic cleaning.
Cleaning aid: Its most essential to clean the fiber optic cables and machinery. This is important because wear and tear and forces of nature might case a lot of dust and grime to accumulate on the surface and the heads of the fiber optics. Its essential to keep them clean from time to time, otherwise there are chances of it hampering the working of the same in the long run. This may include simple things like cotton swabs and lint free wipes, to alcohol, because it’s a residual free cleaning agent.
Basically, the main purpose of testing is to evaluate how the cables are working, and to eliminate the faults, if perceived. Thus via this way quality of standards, as well as overall functioning of system gets improved. Usually, the components that are needed to be tested are: connectors, receiver, light source or LED, detectors and splices etc. Fiber optic inspection is the most important in the testing.
Firstly, before starting with the testing process you need to make sure that the equipment are working properly. This is because if devices are not working properly, then you won’t be able to judge where the problem occurs in the cable. However, some people think of performing it by themselves, if they are aware of its working, but if not then it’s advisable to call professional fiber optic tester.
Next comes the understanding of network layout. A person should be aware of the network design, structure and layout, so that troubleshooting can be performed accurately. Various inspections made under it are:
Fiber inspection: In order to make out fault in the cable, it’s important to first of all inspect the fiber cable carefully. During this process, a tester needs to first of all isolate the cables from each other without breaking the link.
Loss point: After isolating the cables next step is to see where the loss point in the cable is? There may be break, crack, tight bend etc. which would be hindering the process of data transmission in the cables.
Connector verification: Likewise faults are inspected in the cables, it’s also important to verify the connectors, as well, so that overall functioning of the cables can be maintained.
If you have a look at things around you then you will see that fiber optic technology surrounds us everywhere. From electronic equipment to our modern day fast-end communication tools, everything uses these amazing optical fibres.
One of the most important aspects is testing which is related to fiber optic testing devices. To make sure that these tools are running steadfastly, you need to perform regular check-ups and inspections. There are various tools available in the market that you can purchase to complete an inspection kit for the task, or you can even buy these modern day automated kits (which are a much costlier option).
